6GK1551-2AA00 6GK1551-2AA00-机床供应网

产品详情

6GK1551-2AA00 西门子代理商接口网卡 profibus网卡西门子通讯处理器西门子工控通讯网卡西门子工控通讯卡西门子工控通讯主板
西门子工控通讯模块

_______________________

【SIEMENS】

上海施承电气自动化有限公司

联系人：彭立道（销售工程师）

______________________________________

II 型 PC 卡（CardBus 32 位），用于将编程器/PC 和带有 PC 卡插槽的便携式 PC（CardBus 32 位）连接到 PROFIBUS 和 SIMATIC S7 的 MPI
通讯服务：
- PROFIBUS DP 1 类主机，包括带有扩展 SOFTNET DP 的非循环式 DP
- PROFIBUS DP 2 类主机，包括带有扩展 SOFTNET DP 的非循环式 DP
- PROFIBUS DP 从站带有 SOFTNET DP 从站
- 编程器/OP 通讯
- S7 与 SOFTNET-S7 的通讯
- 通过 SOFTNET-DP 或 SOFTNET-S7 进行开放式通讯（基于 FDL 接口的发送/接收）
可用于：
- STEP 7 和 NCM PC；（ProTool、Micro/Win、ProTool/Pro、SIMATIC PDM，用于编程器/OP 通讯）
- SOFTNET-S7 (用于 S7 通讯)
- SOFTNET DP，SOFTNET DP 从站（用于 DP）
相应的OPC服务器包含在在通讯软件的供货范围内

Benefits

将笔记本电脑或者其它便携式 PC 连接到 PROFIBUS 上（例如，用于诊断和调试）
安装和调试都十分简单
用作 SOFTNET 的优化
OPC 作为标准接口
具有 NCM PC 和 STEP 7 的统一程序和组态功能

Area of application

CP 5512 能将具有 PC 卡插槽（CardBus 32 位）的编程器和便携式工控机连接到 PROFIBUS 和 SIMATIC S7 的 MPI 多点接口。

Design

用于 Cardbus (32 位) 的 PC 卡 II 型
用于连接 PROFIBUS 的带 9 针 D 型连接器的适配器

Functions

CP 5512 可在不同的软件包下进行操作，并允许用户通过 PROFI-BUS 和多点接口(MPI)执行编程设备的功能和 PC 函数。

每台 PG/PC/笔记本电脑上只能使用一个 CP。每个CP 只能使用一个相同的协议 (PROFIBUS DP， S7 通信或者 FDL)。

下面的软件包支持 CP 5512：

STEP 7 V5.2 and higher;
drivers for the CP 5512 that execute under Windows 2000 Professional and XP Professional are included in the scope of supply of STEP 7.
SOFTNET-S7 V6.1 and higher;
with this package, the S7 programming interface under Windows XP Professional can be used (Windows 2000 Professional from SOFTNET-S7 V6.1 SP1 upwards).
SOFTNET-DP V6.1 and higher;
the CP 5512 can be used as a PROFIBUS DP Master Class 1 or 2 under Windows XP Professional (Windows 2000 Professional from SOFTNET-DP V6.1 SP1 upwards).
SOFTNET-DP slave V6.1 and higher;
for using the CP 5512 as a PROFIBUS DP slave under Windows XP Professional (Windows 2000 Professional from SOFTNET-DP slave V6.1 SP1 upwards).
STEP 7-Micro/WIN V3.2 SP4 and higher;
hardware basis for the programming software of the SIMATIC S7-200 programmable controller.
ProTool, ProTool/Pro V6.0 SP2;
the CP 5512 can be used as a hardware basis for the configuration tool for SIMATIC Operator Panels, Touch Panels and Text Displays.
NCM PC V5.2 and higher;
under Windows XP Professional
SIMATIC PDM;
drivers for the CP 5512 that execute under Windows 2000 Professional and XP Professional are included in the scope of supply of SIMATIC PDM.

Technical Specifications

Order number		6GK1551-2AA00
Product type designation		CP 5512
Transmission rate
Transfer rate
● at the 1st interface acc. to PROFIBUS		9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of electrical connections
● at the 1st interface acc. to PROFIBUS		1
Type of electrical connection
● at the 1st interface acc. to PROFIBUS		9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage
● 1 from backplane bus		3.3 V
Relative symmetrical tolerance for DC
● at 3.3 V		5 %
Consumed current
● 1 from backplane bus for DC maximum		0.52 A
Active power loss		1.8 W
Permitted ambient conditions
Ambient temperature
● during operation		5 ... 45 °C
● during storage		-20 ... +60 °C
● during transport		-20 ... +60 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP00
Design, dimensions and weight
Module format		PC card Type II CardBus (32 bit)
Width		86 mm
Height		5 mm
Depth		54 mm
Net weight		130 g
Number of plug-in cards of same design plug-in per PC station		1
Number of units Note		-
Performance data
Performance data open communication
Software for open communication by means of SEND/RECEIVE required		Yes, SOFTNET-PB DP / SOFTNET-PB DP Slave / SOFTNET-PB S7
Number of possible connections for open communication by means of SEND/RECEIVE maximum		50
Performance data PROFIBUS DP
Software for DP master function required		Yes, SOFTNET-PB DP
Service as DP master
● DPV0		Yes
● DPV1		No
● DPV2		No
Number of DP slaves on DP master usable		64
Amount of data
● of the address area of the inputs as DP master total		7 808 byte
● of the address area of the outputs as DP master total		7 808 byte
● of the address area of the inputs per DP slave		244 byte
● of the address area of the outputs per DP slave		244 byte
● of the address area of the diagnostic data per DP slave		244 byte
Software for DP slave function required		Yes, SOFTNET-PB DP slave
Service as DP slave
● DPV0		Yes
● DPV1		No
Amount of data
● of the address area of the inputs as DP slave total		122 byte
● of the address area of the outputs as DP slave total		122 byte
Performance data S7 communication
Software for S7 communication required		Yes, SOFTNET-PB S7
Number of possible connections for S7/PG communication maximum		8
Performance data multi-protocol mode
Number of configurable connections per PC station		207
Product functions management, configuration
Configuration software required		Included in the scope of delivery of the required software product
Product functions Diagnosis
Product function
● Port diagnostics		Yes
Standards, specifications, approvals
Standard
● for EMC		2004/108/EC
● for safety from CSA and UL		CAN/CSA C22.2 & UL 60950-1
● for emitted interference		EN 61000-6-3, EN 61000-6-4
● for interference immunity		EN 61000-6-1, EN 61000-6-2
Certificate of suitability
● CE marking		Yes
● C-Tick		Yes